Horizontal Cat5e Shielded Keystone Jack – (P/N: 1305-03023)
Overview
PowerPRO™ : Performance You Can Rely On! Cat.5e 110/ Krone horizontal type fully shielded keystone Jack, T568A/ B
PowerPRO™ : Performance You Can Rely On!
Cat.5e 110/ Krone horizontal type fully shielded keystone Jack, T568A/ B. ?The DINTEK PowerPRO 8-position modular jack offers enhanced performance at component, link and channel levels. Our shielded jacks offer increased flexibility with universal termination using either T568A or T568B wiring patterns. The PowerPRO Enhanced CAT5 shielded jacks have been manufactured with the ability to fit most major face plate brands with or without module clips. Regardless of your application requirements, the DINTEK PowerPRO keystones in combination with other DINTEK CAT.5E components, will give an assurance to the end user, along with the aid of the 25year warranty offered by DINTEK Electronic to it’s registered installers. DINTEK PowerPRO .... Systems you can rely on.
Applications
• Voice
• ISDN
• 10Base T(IEEE 802.3)
• Fast Ethernet(IEEE802.3)
• 100Vg-AnyLAN(IEEE 802.12)
• Token Ring(IEEE 802.5)
• TP-PMD(ANSI X3T9.5)
• 100Base-T Ethernet(IEEE 802.3u)
• 155/622 Mbps ATM
• 1000Base-T
• 550 MHz Broadband video
Standards
• UL, ETL Verifi ed
• ANSI/TIA-568-C.2
• ISO/IEC 11801
• EN 50173
Features
• Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
• 110 type IDC termination
• Accept 22~26AWG, stranded or solid wire
• Modular jack meet FCC part 68
• Wiring: T568A/B
• 110 type IDC termination
• Accept 22~26AWG, stranded or solid wire
• Modular jack meet FCC part 68
• Wiring: T568A/B
Environmental Conditions
• Temperature range:
Storage: -40 to +70°C
Operational: -10 to +60°C
• Relative humidity (operational): max. non-condensing 93%
Electrical Characteristics
• Insulation resistance between any two conductors: 500 MegaOhms min.
• Dielectric with standing voltage: 1000V, RMS, 60HZ, 1 MIN.
• Contact resistance: 20 MilliOhms max.
• Current rating: 1.5 AMPS at 20°C
• DC résistance: Max. 0.1 Ohms
• Dielectric with standing voltage: 1000V, RMS, 60HZ, 1 MIN.
• Contact resistance: 20 MilliOhms max.
• Current rating: 1.5 AMPS at 20°C
• DC résistance: Max. 0.1 Ohms
Physical Characteristics
• Housing: High-impact, Flame Retardant, UL94V-0 rated, spring wire/contact blades.
• Contact material: Phosphor bronze alloy
• Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.
• Contact material: Phosphor bronze alloy
• Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.
Mechanical Characteristics
• Total mating force: 800 grams for a 8 wire leads minimum.
• Retention: 30lbs min between the jack and plug.
• Insertion/Extraction life: 750 cycles minimum.
• Number of IDC terminations: 200 minimum.
• Retention: 30lbs min between the jack and plug.
• Insertion/Extraction life: 750 cycles minimum.
• Number of IDC terminations: 200 minimum.