Cat5e S/FTP 4 Pair Cable 305mtr – (P/N: 1105-03001)

Overview

PowerPRO™ : Performance You Can Rely On! DINTEK PowerPRO Category 5E 4 Pair SF/UTP cable, has been designed to support high speed data transmission systems.

Compare Product

PowerPRO™ : Performance You Can Rely On!

DINTEK PowerPRO Category 5E 4 Pair SF/UTP cable, has been designed to support high speed data transmission systems.This cable is part of the PowerPRO System range of products, that have been designed based on the PowerSum principle of crosstalk measurement and{social} testing. We recommend that the full range of PowerPRO products is used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth. When combined as an end to end solution, the PowerPRO system, when installed by a certified installer can be warrantied for 25yrs.

Applications

•   Voice; T1; ISDN
•  10BASE-T (IEEE 802.3)
•  16Mbps Token Ring (IEEE802.5)
•  100VG-AnyLAN (IEEE802.12)
•  100BASE-T Ethernet (IEEE802.3)
•  155/622Mbps 1.2/2.4 Gbps ATM
•  1000Mbps Gigabit Ethernet
•  550MHz Broadband Video

Standards

•  ISO/IEC11801 2nd edition
•  ANSI/TIA/EIA Cabling Standard 568-C.2
•  CENELEC EN 50173

Cable Data

•   Twisted pair color code:
Pair 1> blue, white/blue ring.
Pair 2> orange, white/orange ring
Pair 3> green, white/green ring
Pair 4> brown, white/brown ring
•   Conductor: 24AWG solid anneal copper wire
•   Insulation material: Polyethylene
•   Diameter of dielectric core: 1.02±0.05mm
•   Number of twist pairs: 4 pairs
•   Individual Shielding:
•   Maylar film as a layer of buffer
•   Aluminum-foil-laminated shield.
•   Tinned copper wire braid shield with nom. 60%
•   One 24AWG drain wire put between Aluminum-foil-laminated and   Braiding layer.
•   Assembly: 4 pairs of dielectric core shall be stranded in circular form.
•   Material of jacket: PVC, or LSZH.
•   Overall Diameter: Ave. 6.5±0.2mm
•   Color: Gray

 

Physical Characteristics

•   Jacket elongation: min 100%
•   Jacket tensile strength: PVC>>min 1500psi, LSZH>>min 1200psi
•   After aging jacket tensile strength: PVC>>70% of before aging. LSZH>>75% of before aging.
•   After aging jacket elongation: PVC>>65% of before aging. LSZH>>75% of before aging

Electrical Characteristics

•  Capacitance: Max. 5.6nf/100m
•   Capacitances unbalance pair to groud: max. 160pf/100m at 1 kHz
•   DC resistance of conductor: max. 9.38Ω/100m  at 20°C
•   DC resistance unbalance of conductor: max. 2% at 20°C
•   Insulation resistance: min. 5000MΩ/Km at 20°C
•   Velocity of propagation: nom. 66%
•   Rated temperature: 60/75°C
•   Rated voltage: 30V
•   Dielectric test: min. 1 kV / 1 minute, without any breakdown.
•   Delay skew: 45n

TOP