JetBox 5300-W

JetBox 5300-w is an embedded Linux computer with low power consumption and -40 ~80oC wide operating temperature, designed to provide advanced network performance in front-end industrial control applications. The embedded Linux-based computer acts as an outstanding network platform and provides efficient and reliable data transmission through its flexible interface, including 4 Serial, 8 DIO, 2 Ethernet and 2 USB ports. Moreover, with the Linux SDK and Korenix auto-run function it becomes an excellent embedded solution for developing programmable customized applications while ensuring the reliable data transmission in severe industrial environments.

Compare Product
Category:

JetBox 5300-w is an embedded Linux computer with low power consumption and -40 ~80oC wide operating temperature, designed to provide advanced network performance in front-end industrial control applications. The embedded Linux-based computer acts as an outstanding network platform and provides efficient and reliable data transmission through its flexible interface, including 4 Serial, 8 DIO, 2 Ethernet and 2 USB ports. Moreover, with the Linux SDK and Korenix auto-run function it becomes an excellent embedded solution for developing programmable customized applications while ensuring the reliable data transmission in severe industrial environments.

Embedded Linux Ready
Korenix is devoted to the Linux comput ing and benefits customers by providing the JetBox series with embedded Linux ready system and easy-to-use interface. Compared to general purpose Linux system, embedded Linux is performance-optimized for front-end industrial control.

Linux Auto-run
The JetBox 5300 suppor t Korenix Auto-Run customization setting on SD card. The advanced software feature allows users to configure their own Linux commands once the system is booted. Users only need to store the commands on an “Auto-Run” file and then store it on an SD card. This way they can automatically run specific configurations or run specific applications in the JetBox 5300 embedded computers making the industrial network management easier and more flexible.

RISC-Based Computer with low power consumption
The JetBox 5300 is a RISC-based computer with lower power consumption and is stable and reliable. The JetBox 5300 carries 2 LAN ports, 2 USB ports, 2 RS232/422/485, 2 RS232, 4 digital inputs and 4 outputs to be the best solution in industrial control.

Dual power inputs
The JetBox 5300 carries dual power inputs to make a power redundancy to reduce the impact of unstable power inputs.

Digital Input & Output
Digital inputs and outputs are widely used in industrial applications such as indicators, alarms, reed switches, or sensors. The compact JetBox carries 4 digital output and 4 digital input channels and work as a front-end control agent.

Modbus Gateway (Optional)
For Modbus control applications, Korenix also provides the optional Modbus Gateway function on the SD card. This value-added software enables serial Modbus RTU (or Modbus ASCII) devices to communicate with Modbus TCP devices. It is an open serial communication protocol based on master/slave architecture and used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA).

Embedded 2 LAN & 4 Serial Linux Computer

  • RISC CPU with low power consumption for reliable performance
  • Embedded Linux ready for easy maintenance
  • SD card slot for customized configuration
  • 4DI & 4DO for digital device connections
  • 2 RS232/422/485 and 2 RS232, supporting TCP server mode for device remote control
  • 2 LAN ports for Daisy-Chain Controller
  • Modbus gateway (optional)
  • Dual DC 12~48V redundant power inputs for system reliability
  • -40~80oC wide operating temp, fanless

Hardware Specifications

System
Processor
Atmel AT91RM9200 180MHz
System flash
16MB Flash ROM
System Memory
SDRAM 64MB
Ethernet
10/100 Base-Tx RJ-45 connector x2
Storage
SD card slot x1
Serial Port
RS-232 x2, RS-232/422/485 x2 (RJ45 connector)
USB
USB 2.0 x2 (Host)
Supporting devices
USB flash, wireless dongle
Digital IO
4 DI & 4 DO
LED on Ethernet port
Link/Activity (Green on/ blinking)Fdx/ Col status (Yellow on/ blinking)
LED per unit
Power On/off x2 (Green on/off)SD card x1 (Green plug/unplug)Power on/off switch x1

Reset button x1

Watchdog Timer
Generates a time-out system reset, 1 sec.
Power Supply
dual inputsDC 12 ~ 24V
Power Consumption
Single input 5.4W at 12V, 6.72W at 48VDual inputs 5.28W at 12V, 7.2W at 48V
OS support
Embedded Linux 2.6.21
Mechanical
Construction
Rugged Aluminum Alloy Chassis, IP31 protection
Color
Silver
Mounting
DIN Rail
Dimension
149 (H) x 120.5 (W) x 66(D) mm
NetWeight
0.7kg
Environment
Operating Temp
-40 ~ 176°F(-40 ~ 80°C)*, 5 to 95% RH
Storage Temp
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
Regulation
FCC class A, CE, UL*EN55022 class A,
EN55024,
EN61000-3-2, 3EN61000-4-2, 3, 4, 5, 6, 8, 11
Shock
IEC60068-2-27 (50g peak acceleration)
Vibration
IEC60068-2-6 (5g/10~150Hz/operating)IEC61373 (Random/ 5~150Hz/ operating)
MTBF
Greater than 200,000 hours @25°C
*Specifications may change without prior notice
Software Specifications
Embedded Linux 2.6.21
Bootloader

JetBox bootloader

Protocol

ARP, PPP, CHAP, IPv4, PAP, ICMP,
TCP, UDP, NFS

Software packages

busybox (telnetd, inetd, udhcp),

microcom, setserial, bridge-utils, ethtool, iptables, net-snmp,

ntp, openssh, openssl, pppd, ftpd, rp-pppoe, smtpclient,

syslogd, goahead web server

Korenix Linux auto-run function

Customized configuration

Process Monitoring

Interface

Serial Interface

Serial service modes: TCP server

LAN Interface

Ethernet: 10/100 Base-Tx RJ-45 connector x2 (redundant), auto MDI/MDI-X

Management and Security
Security: HTTPS, SSHSNMP: MIB and trapsNTP for time management
Device Drivers

SD card, USB, Watchdog timer, UART, Ethernet

TOP