WLn-xROAD

ACKSYS proposes a wide range of wireless equipments (WLAN) for industry and transportation fields relying on the WiFi IEEE 802.11 standards (2.4 & 5 GHz) and on the 900 MHz unlicensed radio band for long range and non-line-of-sight operation including: access points, bridges, bridges routers, repeaters, serial to wireless gateways, radio switches, packs for point to point communications.

Category:

ACKSYS proposes a wide range of wireless equipments (WLAN) for industry and transportation fields relying on the WiFi IEEE 802.11 standards (2.4 & 5 GHz) and on the 900 MHz unlicensed radio band for long range and non-line-of-sight operation including: access points, bridges, bridges routers, repeaters, serial to wireless gateways, radio switches, packs for point to point communications.

These equipments make it possible to:

  • Build a wireless network
  • Connect RS232, RS422, RS485 serial equipments together without any wiring operation
  • Connect Ethernet networks together without any cable
  • Build a wireless bridge between a serial MODBUS network and MODBUS/TCP
  •  Wirelessly connect Ethernet, MODBUS/TCP, PROFINET, Ethernet/IP, DNP3 equipments
Functions 11n WiFi Access Point, Ethernet Bridge , Repeater and MESH Point for automotive and heavy duty applications
Format IP66 aluminun enclosure, universal mounting
Dimensions L:185 x W:64 x H:35 mm
Weight 450g with cables without antennas
Number of serial channel
MODBUS / PROFINET / Ethernet/IP support
Windows COM port redirection
Serial Link
Maximum speed Up to 300 Mbps
Connection type Terminal block (inside enclosure)
Connection cable 2 meters cable with RJ45 connector & power wires
Ethernet link Gigabit 10/100/1000 auto-sensing Ethernet port, plug & play mode & auto MDI/MDIX cross-over
Radio link Compliant to the IEEE 802.11n a/b/g MIMO 3T3R, 2.4 / 5 / 5.4 GHz standards
Radio redudancy
Frequency range 2.4 / 5 / 5.4 GHz
High power RF card option
Radio Modem (AD HOC) mode Yes, Bridge mode
Rapid roaming < 50 mS
Antennas Up to three 2.4 / 5 GHz MIMO antenna
External antenna connector for long range communications RP-SMA connector
Nominal range with built-in antennas 300m, open field
Security 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
Modes Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network, MODBUS/TCP wireless gateway, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, bridge router, turbo roaming (less than 50 mS single channel), WMM QoS, multicast and IGMP-Snooping modes are fully supported.
Administration Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM
Default signaling LEDs signaling for radio quality, activity and status, Link 10/100/1000 and activity for the LAN port
Data plug for easy configuration save & restore (C-KEY)
Digital inputs
Power supply DC power supply (+9VDC to +36VDC), terminal block inside the enclosure
Power consumption 10W typical power consumption
Power over Ethernet
PoE (IEEE 802.3at)
No
Environnement Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +80°C
Standard MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP65 seal rating EN 301489-17 & EN 61000-6-2 (CEM), UTAC E2 (2004/104)
LED Signalling LEDs signaling for radio quality, activity and status, Link 10/100/1000 and activity for the LAN port
Operating systems Windows, Linux, UNIX as well as any operating system supporting TCP/IP
TOP
Chat us
1
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!