VM1600 16×16 Modular Matrix Switch

The VM1600 Modular Matrix Switch offers advanced access and real-time control of multiple local and remote A/V input devices and displays from a single chassis. The VM1600 allows users to independently switch and route video and/or audio content directly to various monitors, displays, projectors and/or speakers simply by pressing front panel pushbuttons. A built-in Scaler encodes the…

• Connects any of 16 video sources to any of 16 displays in combination with ATEN Modular Matrix Solutions

• Superior video quality – HDTV resolutions of 480p, 720p, 1080i and 1080p (1920 x 1080); VGA, SVGA, XGA, SXGA and WUXGA (1920 x 1200)

• HDCP 1.4 Compatible

• Seamless Switch™ – provides continuous video streams, real-time switching and stable signal transmission*

• Video wall - allows you to create custom video wall layouts via intuitive web GUI

• EDID Expert™ – selects optimum EDID settings for smooth power-up and highest quality display

• Easily switch between multiple sources and multiple displays

• Hardware Configuration:
¤ Front panel pushbuttons
¤ RS-232 serial port

• System Operation
¤ Browser-based Graphical User Interface (GUI)
¤ Telnet

• Built-in bi-directional RS-232 serial remote port for high-end system control

• Hot-pluggable:
¤ Modular Fan Design
¤ Power Module
¤ Easy integration of I/O boards

• Optional redundant power supply for continuous operation

• Firmware upgradeable via web

• Rack Mountable

• Built-in scaler on each output port to support the scaling function for different video resolutions

• Consumer Electronics Control (CEC) support (VM7804/VM8804)

• Audio-enabled, HDMI audio can be extracted, and stereo audio can be embedded (VM7804/VM8804)

If Seamless Switch is enabled, the video output will not display 3D, Deep Color or interlace (i.e., 1080i) resolution features. To use of these features, you must disable Seamless Switch.

Interfaces Depends on which I/O board is inserted
Impedance 100 ?
Max. Data Rate 10.2 Gbps (3.4 Gbps per lane)
Max. Pixel Clock 340 MHz
Compliance HDMI (3D, Deep Color, 4K)
HDCP 1.4 Compatible
Consumer Electronics Control (CEC)
HDBaseT Compatible
Input Depends on which Input board is inserted
Output Depends on which Output board is inserted
RS-232 Connector: 1 x DB-9 Female (Black)
Serial Control Pin Configurations:
Pin2 = Tx, Pin 3=Rx, Pin 5= Gnd
Baud Rate and Protocol:
Baud Rate:19200, Data Bits:8, Stop Bits:1, Parity: No, Flow Control: No
RS-485/RS-422 Connector: 1 x Captive Screw Connector, 5 Pole
Ethernet Connector: 1 x RJ-45 Female
EDID Settings EDID Mode: Default / Port1 / Remix / Customized (EDID Wizard support)
Connectors 1 x 3-Prong AC Socket
Maximum Input Power Rating 100-240 VAC; 50-60Hz; 1.0A
Consumption 120 VAC, 180W; 230 VAC,172W
*A redundant power supply is optional.
Fan Airflow: 60 cfm
Operating Voltage: 10.8 - 13.8 VDC
Operating Temp: -10 - 70°C
Operating Temperature 0 - 40°C
Storage Temperature -20 - 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 17.00 kg ( 37.44 lb )
Dimensions (L x W x H) 48.22 x 39.90 x 26.59 cm
(18.98 x 15.71 x 10.47 in.)
Carton Lot 1 pc





























* The specification and pictures are subject to change without notice.
* All trademarks and logos are the properties of their respective holders.