TV-IP440PI – Indoor/Outdoor 2MP 1080p PoE+ IR PTZ Speed Dome Network Camera

Lens    
•    Focal length: 4.7 - 94 mm
•    Focal depth: 10 – 1,000 mm (Wide-Tele)
•    Aperture: F1.6 – 3.5 (Wide - Tele)
•    Sensor: 1/2.8” Progressive Scan CMOS
•    Focus: auto, semi-auto, and manual
Viewing Angle
•    Horizontal: 58.3 – 3.2° (Wide – Tele)
Zoom  
•    Optical: 20x
•    Digital: 16x
•    Speed: 3s
Pan/Tilt  
•    Pan: endless 360°
•    Tilt: -15 - 90° (auto flip)
•    Pan speed: (manual) 0.1 - 80°/s, (preset) 80°/s
•    Tilt speed: (manual) 0.1 - 80°/s, (preset) 80°/s
•    Number of presets: 300
•    Patrol: 8 patrols, up to 32 presets per patrol
Minimum Illumination  
•    IR off: color: 0.05 lux, B/W: 0.01 lux
•    IR on: 0 lux
•    100 m IR illumination distance
•    Smart IR: automatically adjusts wide angle and narrow focus IR to match zoom ratio
Video 
•    Digital Wide Dynamic Range (DWDR)
•    Backlight Compensation (BLC)
•    3D Digital Noise Reduction (DNR)
•    Shutter speed: 1 - 1/10,000s
•    H.264 resolution: 1920 x 1080 up to 25 fps
•    MJPEG resolution: 1920 x 1080 up to 25 fps
Audio  
•    2-way audio supported (mic and speaker not included)
•    External microphone line in / speaker line out
Micro SD
•    Up to 128 GB micro SD card support
Hardware Standards 
•    IEEE 802.1X
•    IEEE 802.3
•    IEEE 802.3u
•    IEEE 802.3at
Device Interface
•    10/100 Mbps PoE+ port
•    Power connector (for non-PoE installation)
•    Audio I/O port (in/out/ground)
•    Micro SD card slot (128GB max.)
Input / Output    
•    Audio input: 1 audio line in, 2 – 2.4 V; impedance: 1000 Ω, ± 10%
•    Audio output: 1 output line out, impedance: 600 Ω
Housing
•    Weather rating: IP66
•    TVS 4,000 V lightning, surge, and voltage transient protection
•    Built-in automatic heater for cold weather conditions
Network Protocol  
•    IPv4, IPv6, UDP, TCP, IGMP, ICMP, ONVIF v2.2
•    DHCP, NTP, DNS, DDNS, SMTP, FTP, SNMP (v1, v2c, v3)
•    CIFS/SMB, NFS
•    HTTP, HTTPS
•    PPPoE
•    UPnP, RTSP, RTP
Power  
•    Input: PoE+ (IEEE 802.3at)
•    Consumption: Max. 20W
Optional Power Brick 
•    Input: 100 – 240V AC , 50/60Hz 1.6A
•    Output: 12V DC, 2A external power brick
•    Required regional power cord not included
Operating Temperature
•    -30 - 65 °C (-22 - 149 °F)
Operating Humidity  
•    Max. 90% non-condensing
Certifications    
•    CE
•    FCC
Dimensions 
•    295 x 165 x 165 mm (11.6 x 6.5 x 6.5 in.)
Weight 
•    2 kg (4.4 lbs.)
Required Mounting Accessories (not included) 
•    Ceiling mount: TV-HC400
•    Pole mount: TV-HP400
•    Wall mount: TV-HW400
•    Corner mount: TV-HN400
Management Interface  
•    Multi-language support: English, French, German, Spanish and Portuguese
•    Time, date, and text overlay
•    Image settings: brightness, contrast, saturation, limit gain, sharpness, focus mode, minimum focus, exposure mode, smart IR, video standard, day/night switch, sensitivity, mirror, slow shutter, D-WDR, lens initialization, BLC, white balance, digital noise reduction, noise reduction level, Defog mode, zoom limit, HLC
•    DWDR enhances video quality in high contrast daytime lighting
•    3D DNR Digital Noise Reduction enhances night vision quality
•    Scheduled recording: continuous and motion detection
•    Video storage: to computer, NAS, CIFS/SMB share, NFS, Micro SD card, FTP server, or through software
•    Motion detection fields: define custom motion detection areas, motion sensitivity, and dynamic motion analysis
•    Smart privacy masks: custom privacy masks are fixed to an area of interest as the camera pans and tilts
•    Tamper detection: email notification if the viewing field is suddenly obscured
•    Browser video playback: advanced playback functionality with visual timeline displaying detected motion and scheduled recordings
•    Alert messages: storage full, storage error, and illegal login
•    Snapshot: real time snapshot, motion detection with schedule, tamper detection with schedule
•    Supported dynamic DNS services: dyn.com and No-IP.org
•    Management Setting: maximum 32 user accounts
•    Supports remote management
•    Storage logs: Alarm, Exception, Operation, and others
•    Compatibility: Internet Explorer® 9.0 or higher, Safari® 5.0 or higher
TRENDnetVIEW Pro Software  
•    Supports up to 16 TRENDnet cameras
•    Multiple language support
•    Set recording options (motion detection, schedule, event trigger)
•    Search and playback
•    Custom viewing modes and options
•    Compatibility: Windows® 8.1, 8, 7, Vista, XP, Windows Server® 2003, 2008, 2012
TRENDnetVIEW App 
•    Free iOS® and Android™ app
•    View your camera on your mobile device
•    Take snapshots
•    Pan/Tilt/Zoom
Warranty  
•    3 year

PACKAGE CONTENTS
•    TV-IP440PI
•    CD-ROM (Software & User’s Guide)
•    Quick Installation Guide
•    Power brick (12V DC, 2A)
•    Accessories