• Technology |
Standard |
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-TX
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol |
• System Performance |
Switch Technology |
Store and Forward Technology with 32Gbps Switch Fabric. |
System Throughput |
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet |
CPU Performance |
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer. |
System Memory |
8M bytes flash ROM, 64M bytes SDRAM |
Transfer packet size |
64 bytes to 1632 bytes (includes 1522 bytes VLAN Tag) |
MAC Address |
8K MAC address table |
Packet Buffer |
1M bits shared memory for packet buffer |
Transfer performance |
14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet |
Environment Monitoring |
Embedded board-level thermal detector for system temperature monitoring |
Relay Alarm |
Dry Relay output with 2A /30V DC or 0.5A/125V AC ability |
• System Management |
Configuration and monitoring interface |
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm reboot, reset to default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9. |
Telnet & Local Console |
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH. |
SNMP |
v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address |
SNMP MIB |
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB |
Korenix Utility |
Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery |
Network Time Protocol |
Supports NTP protocol with daylight saving function and localize time sync function |
Management IP Security |
IP address security to prevent unauthorized access |
E-mail warning |
4 receipt E-mail accounts with mail server authentication |
System Log |
Supports both Local or remote Server with authentication |
• Network Performance |
Port Configuration |
Port link Speed, Link mode, current status and enable/disable. |
Port Trunk |
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port. |
VLAN |
IEEE 802.1Q VLAN with GVRP. 64 VLAN groups, VLAN ID from 1 to 4094.
Supports Trunk, Hybrid and Link access modes |
Class of Service |
IEEE 802.1p class of service; per port 4 priority queues |
Traffic Prioratization |
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network. |
IGMP Snooping |
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port |
Rate Control |
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets |
Port Mirroring |
Online traffic monitoring on multiple selected ports |
Port Security |
Port security to assign authorized MAC to specific port |
DHCP |
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82) |
IEEE 802.1x |
Port based network access control |
Power over Ethernet |
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture |
PoE Operating Mode |
Auto mode:Auto detects and powering by IEEE 802.3af behaviors and IEEE 802.3at LLDP protocol for high power.
Forced mode: User configured power consumption without detection, classification |
PoE forwarding conductor |
M12 D-code: V+ (1,2), V- (3,4) |
PoE Forwarding ability |
IEEE 802.3af: 15.4w
IEEE 802.3at: 30w |
Power Budget Control |
Port Based budget control with priority control, system will auto calculate total power and shut down low priority port when drawing current is over the power supply |
• Network Redundancy |
Multiple Super Ring (MSR) |
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing and backward compatible with legacy Super Ring |
Rapid Dual Homing (RDH) |
Multiple uplink paths to one or multiple upper switch |
Trunk Ring |
Integrate port aggregate function in ring path to get higher throughput ring architecture |
MultiRing |
Couple or multiple up to 16 Rapid Super Rings, JetNet 6710G-M12 supports up to 4 100M rings and 1 Gigabit ring in single switch |
Rapid Spanning Tree |
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w |
• Interface |
Enclosure Port |
10/100 TX port
JetNet 6710G-M12: 8 x M12-D-Code 4-pin Female
10/100/1000 TX port
JetNet 6710G-M12: 2 x M12-A-Code 8-pin Female
Console port & Alarm Relay Output
M12 A-code Male for RS-232 and relay alarm output.
Power port: CTG-4F 4-pin Rugged IP-67 Connector |
Cables |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m) |
RS-232 & Alarm Output |
RS232: M12 A-code female 5-pin connector, TxD (Pin 1), RxD(Pin 2), Signal Ground (Pin 5)
Alarm Output :M12 A-code female 5-pin connector 3, 4 |
LED Indicators |
10/100 RJ-45: Link /Activity(Green), Full duplex/Collision (Yellow)
Gigabit Copper: Link/Activity(Green)
PoE port: IEEE 802.3af 15.4w (Green on: Power forwarding; Blinking: PoE Abnormal )
IEEE 802.3at High Power High Power (Blue on: Power forwarding; Blinking: PoE Abnormal)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Red On)
R.M.: Ring Master (Green on), Ring Failure occurred (Yellow on)
Sys: System Ready ( (Green on: system ready) |
Power input interface |
Redundant power input |
Digital Alarm Output |
Dry Alarm Relay output integrated within RS-232 ( pin 3 & 4).
Alarm Relay activate once pre-configured event occurred. |
• Power Requirements |
System Power |
Input Voltage: DC 48~57V, redundant input with reverse protection |
• Mechanical |
Installation |
DIN-Rail mount or Wall Mount |
Case |
Steel Metal and aluminum case |
Dimensions |
JetNet 6710G-m12/ 6710G-RJ : 198 (W) x 145.2 (H) x 74 (D) w/o mounting kit
JetNet 6710G-m12/ 6710G-RJ : 230.6 (W) x 145.2 (H) x 74 (D) w/mounting kit |
• Environmental |
Operating Temperature |
-40°C ~60°C: 15.4w x 8 ports
-40°C ~60°C:30w x 8 ports |
Operating Humidity |
0% ~ 90%, non-condensing |
Storage Temperature |
-40°C~ 85°C |
Hi-Pot |
AC 1.5KV for all ports and power |
• Regulatory Approvals |
EMC |
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11.
Railway EMC: EN 50121-4 and EN 50121-1 |
Vibration and Shock |
Compliance with IEC 61373 for Railway and Rolling stock. |