JetNet
3810Gf / 3810f

JetNet 3810Gf / 3810f is a PoE Boost Switch designed with 8 Fast Ethernet PoE ports and 2 Gigabit / Fast Ethernet uplink ports to extend the high and low bandwidth data through fiber uplink connection for flexible distance mobile surveillance applications. JetNet 3810Gf / 3810f integrate Korenix patented vehicle PoE technology – the 12V to 48V power booster for making the deployment of standard PoE IP cameras feasible on buses, railcars, ships, etc. Moreover, the compact size with aluminum alloy metal enclosure allows JetNet 3810Gf / 3810f to reliably operate under -25~60℃ wide temperature range applications.

Category:

JetNet 3810Gf / 3810f is a PoE Boost Switch designed with 8 Fast Ethernet PoE ports and 2 Gigabit / Fast Ethernet uplink ports to extend the high and low bandwidth data through fiber uplink connection for flexible distance mobile surveillance applications. JetNet 3810Gf / 3810f integrate Korenix patented vehicle PoE technology – the 12V to 48V power booster for making the deployment of standard PoE IP cameras feasible on buses, railcars, ships, etc. Moreover, the compact size with aluminum alloy metal enclosure allows JetNet 3810Gf / 3810f to reliably operate under -25~60℃ wide temperature range applications.

For Bus/Railway PoE

JetNet 3810Gf / 3810f, designed with Korenix patented DC 12V to 48V boost technology, is the best solution for the vehicle PoE applications, where DC 48V power supply is not available. With the built-in power booster, the JetNet 3810Gf/ 3810f can be powered by DC 12~24V to deliver 15.4W per port and 65W* per unit at DC 48V to PoE-enabled devices such as IP cameras, PoE Wireless APs, PoE IP phones…etc. and therefore, be easily applied in vehicles or carriages. JetNet 3810Gf / 3810f provides a fast, easy and cost-effective solution for configuring PoE networks on transportation and automation applications.

  • Eight 10/100 TX IEEE 802.3af PoE ports plus two 100FX SFP uplink ports (JetNet 3810f)
  • Eight 10/100 TX IEEE 802.3af PoE ports plus two 1000FX SFP uplink ports (JetNet 3810Gf)
  • Korenix patented built-in DC 12V~24V Booster for rail, bus, transit transportation
  • 65W* total power budget with max. 15.4W per port for PoE cameras
  • Two gigabit / Fast Ethernet Fiber ports for larger uplink bandwidth of surveillance
  • Flexible Fiber transmission by SFP transceivers
  • QoS for prioritized video transmission
  • Fault relay for active warning of port failure
  • -25~60℃ operating temperature
Technology
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3u 100 Base- Fx
IEEE802.3z 1000 Base-Fx
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power Over Ethernet
IEEE 802.1p Class of Service
PoE output voltage
DC 48V
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric
Interface
Configuration
802.3af compliant PoE ports x 8 auto MDI/MDI-x, auto negotiation
1000 Base-FX x2 (JetNet 3810Gf)
100Base-FX x2 (JetNet 3810f)
SFP with hot swappable
Cable
10Base-T: 4-pair UTP/STP Cat 3,4,5, 100ohm (100m) for PoE
100Base-Tx: 4-pair UTP/STP Cat.5, 100ohm (100m) for PoE
Diagnostic LED
LED per unit:
PoE (Green) x8
Fault alarm (Red) x1
Power on/ off (Green on/ off) x1
Gigabit fiber: Link/Act (Green on/ Blinking) x2
Gigabit fiber: Speed (Yellow Blinking) x2
LED on Ethernet port:
Link/ Activity (Green on/ blinking)
Full duplex/ Collision (Yellow on/ Blinking)
Relay Alarm
Dry Relay output with 1A@24V ability
PoE Technology
Alternative B
Performance
Transfer Rate
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100pps for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes for untagged and tagged frames
MAC Address
8K
Packet Buffer
1Mbits
Power Requirements
Power
12~24V
Power Consumption
30W without PoE, 95W with PoE
DC48V
Mechanical
Construction
Rugged Aluminum Alloy Chassis
Mounting
DIN-Rail mount
Dimensions
66(W) x 149(H) x 131.2(D) mm (with Din-rail clip)
Weight
1.05kg
Environmental
Operating Temperature
-13 ~ 140°F(-25 ~ 60°C), 5 to 95% RH
Storage Temperature
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
Regulatory Approvals
EMI
FCC class A, CE/EN55022 Class A
EMS
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27 (50g peak acceleration)
Vibration
IEC60068-2-6 (5g/5~500Hz/random operation)
MTBF
at least 200,000 hours @ 25°C

 

TOP
Chat us
1
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!