JetCon 2502

JetCon 2502 is an Ethernet/POTS to VDSL2 (Very High-Rate Digital Subscribe Loop -2) extender and is compliant with ITU-T G.993.2 standard. It allows carriers to deliver Ethernet data up to 100Mbps in both upstream and downstream over existing twisted copper. The Ethernet/POTS (Plain Old Telephone Service) converter features Discrete Multi -Tone modulator/ de-modulator and VDSL Analog Front End (AFE) technology; it is an ideal solution to carry POTS signal and Ethernet Data stream to 3000 feet to extend local LAN and voice on the same line.

Category:

Ideal Ethernet /Voice Extender
JetCon 2502 is an Ethernet/POTS to VDSL2 (Very High-Rate Digital Subscribe Loop -2) extender and is compliant with ITU-T G.993.2 standard. It allows carriers to deliver Ethernet data up to 100Mbps in both upstream and downstream over existing twisted copper. The Ethernet/POTS (Plain Old Telephone Service) converter features Discrete Multi -Tone modulator/ de-modulator and VDSL Analog Front End (AFE) technology; it is an ideal solution to carry POTS signal and Ethernet Data stream to 3000 feet to extend local LAN and voice on the same line.

Economical and Simple Connection
To deploy VDSL2 access with the telephone network, the VDSL2 converter should follow the line impendence of telephone network. Therefore, each region will adopt different line splitters to provide best communication quality. As a result, users need additional wiring and splitter, but mostly need to make a jumble at home and office. To solve this problem, the JetCon 2502 has implemented splitter for each region to save your installation time and make it more easily to connect.

Central and Discrete Internet Access
For the network inf rast ructure, JetCon 2502 is the best choice for planning centralized internet access through the existing POTS wiring system for hotels, dormitories or for places where there is a need to extend LAN over 100m over a single pair of copper path.

Triple Play – HDTV, Data Access, Video conference
JetCon 2502 allows users to compete with wireless and satellite providers by offering outstanding service, such as Video conference, HDTV or Video chatting over an existing telephone copper cable without any configuration, just plug and play to enlarge infrastructure for your applications.

Internet Last Mile Access
The VDSL2 technology is also deployed at the last mile of internet access. The ISP uses the fiber cable as backbone uplink to the basement of building (FTTB) or corner of streets (FTTC) and uses the existing 1 pair twisted cable of POTS system to carry voice and Ethernet data stream to users via VDSL2 signal.

Intelligent Traffic System application
In Intelligent Traffic systems (ITS), the VDSL2 technology could be applied in the long distance data transmission for the traffic signal control or traffic information signboard. JetCon 2502 can save the fiber cost by using the twisted cable up to 3000 feet at DS/US data rate 35Mbps / 8Mbps for low speed data transmission but over the Ethernet link distance.

Subway & Railway System application
JetCon 2502 can also be applied in the subway and railway system to offer a long distance transmission with low data traffic, such as the Fire Alarm System (FAS) and Passenger Information Direction System (PIDS) with the VDSL2 technology to communicate between outdoor device and Control Room to replace the fiber cable and therefore save more costs.

Industrial Ethernet over VDSL2 Extender

  • IEEE 802.3u 100Base-TX Fast Ethernet Converter
  • IEEE 802.3x Flow control & Back-pressure
  • ITU-T G.993.2 VDSL2 standard
  • 2 x RJ-11 connectors for POTS/ISDN and VDSL 2
  • One RJ-45 10/100Mbps Fast Ethernet Port
  • Built-in POTS/ISDN Splitter
  • Extends Voice and Ethernet transmission distance to 1KM
  • Transparent 1792 bytes packet size
  • Quality of service with broadcast packet filtering for data precedence transmission
  • DC 12~48V Power input by power jack and terminal block
  • Supports AC 1.5KV Hi-Pot isolation protection
  • Operating temperature -40~70°C
Technology
Standard
IEEE 802.3 10 Base-TIEEE 802.3u 100 Base-TXIEEE 802.1p Class of ServiceIEEE 802.1Q Quality of Service

ITU-T G.993.2 VDSL2

Performance
Forwarding Technology
Store and Forward technology with 64 ~1792 bytes packet forwarding ability
Switch Packet Buffer
384Kbits
Mac Table
2K with 300 Sec agent time
Class of Service
4 Packet forwarding queues with 1 (Lowest):4 (Low):8 (High):15 (Highest) WRR (weighted round robin) forwarding schematics
Quality of Service
VLAN tag priority, IPv4 packet precedence and IPv6 ToS.
Broadcast filtering
Fast Ethernet: 200 packet / per sec. @ 100Mbps; 20 packet / per sec. @ 10Mbps
Interface
Number of Ports
1x 10/100Mbps Fast Ethernet port with Auto MDI/MDI-X functionAuto-Negotiation1x Line for ISDN/POTS1x VDSL2
Connectors
10/100 Base-TX: RJ-45 with auto MDI/MDI-X, Auto-NegotiationISDN/POTS: RJ-11VDSL2: RJ-11
Cables
RJ-45 Fast Ethernet port: Cat.4,5, 4-pairs UTP cable, up to 100 metersVDSL2: 1pairs of UTP cable, up to 3000 feet.Line: Integrated ISDN/POTS
Configuration DIP Switch
DIP-1 (Mode selection): On (Master) / Off (Slave)DIP-2 (Impulse protection):On (Interleave)/ Off (Fast);Interleave mode with less than 250ms forwarding latency, Fast mode is less than 2ms forwarding latency.DIP-3 (Rate Control): On (Non-Symmetric )/Off (Symmetric)DIP-4 (SNR Control): On (6dB)/ Off (9dB)

300bps to 921.6Kbps

Diagnostic LED
System Power: Power on (Green on)Fast Ethernet Port: Speed (100 Mbps: Yellow On), Link/Activity: Green on ( Link at 10 or 100Mbps), Green Blinking ( packet is on transmitting)Master (Green On): Device operating under Master ModeVDSL Link/ Negotiation (Green): On/ Link, Blinking/Negotiation
Power Requirements
System Power
DC Jack: 12~48V, Ø 2mm Center PinTerminal block: DC 12~48V, 3-Pin terminal block with earth ground. Power input with polarity reverse protection.
Power Consumption
5Watts @DC 24V(Maximum)
Mechanical
Installation
Wall Mount or DIN-Rail mount
Casing
Aluminum metal case
Dimensions
29mm (H) x 88mm(W) x 114mm (D)
Environmental
Operating Temperature
-40 ~ 70°C
Operating Humidity
0% ~ 95% (Non-condensing)
Storage Temperature
-40 ~ 80°C
Storage Humidity
0% ~ 95% (Non-condensing)
Regulatory Approvals
Hi-Pot
Ethernet port AC 1.5KV for port to power
EMI
FCC Class A; CE/EN55022 class A
EMC Immunity Interface
IEC 61000-4-2, IEC61000-4-3, IEC61000-4-4,IEC61000-4-5, IEC61000-4-6, IEC61000-4-8
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Free Fall
IEC60068-2-32
TOP
Chat us
1
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!