JetCon 2401

JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter with extended fiber transmission. Single-mode and Multi-mode fiber optic ports meet your needs for long distance transmission up to 40KM. JetCon 2401 will automatically detect the data baud rate of the connected full-duplex serial device, ranging from 300 to 921,600bps. By moving up the DIP switch, JetCon 2401 supports an auto setting function without system power reset to change serial interface, fiber wiring architecture and termination of receiver and transmission line. Also JetCon 2401 is specially designed for applications requiring good immunity of EMI/EMS such as power substation, rail and traffic control signification systems under severe electromagnetic interference and wide temperature range.

Category:

JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter with extended fiber transmission. Single-mode and Multi-mode fiber optic ports meet your needs for long distance transmission up to 40KM. JetCon 2401 will automatically detect the data baud rate of the connected full-duplex serial device, ranging from 300 to 921,600bps. By moving up the DIP switch, JetCon 2401 supports an auto setting function without system power reset to change serial interface, fiber wiring architecture and termination of receiver and transmission line. Also JetCon 2401 is specially designed for applications requiring good immunity of EMI/EMS such as power substation, rail and traffic control signification systems under severe electromagnetic interference and wide temperature range.

JetCon 2401 can be easily wall mounted as well as be mounted directly on DIN rail. AC 24V(12~32V) or DC 24V(12~48V) is available for different operating environments. With IP 30 rigid aluminum case, CE/FCC regulatory approvals, and 5-year global warranty, JetCon 2401 is your reliable choice for hazardous applications.

Application

The JetCon 2401 supports two transmission configurations, Peer to Peer in full duplex and Serial Fiber Ring (SFR) in half duplex. In a Peer-to-Peer configuration, two fibers are required between the two converters, one for data in each direction (RX and TX). To expand the number of connected serial devices users can apply the SFP configuration mode and connect the fiber transmitter to the rest of the slaves and eventually back to the master node.

Peer to Peer Serial Communication (PTP) Serial Fiber Ring Communication (SFR)

  • Industrial Serial to Fiber Media Converter

    • 3-in-1 RS232/422/485 to serial fiber media converter
    • Easy mode change without resetting
    • Supports Multi-mode 5KM, Single-mode 40KM
    • PTP or SFR transmission mode for serial fiber ring communication
    • Auto baud rate and direction control
    • High level immunity with 15KV ESD protection
    • Two-way 120 ohm line terminator
    • Supports biasing resistor
    • Dual modes for power input, AC 24V(12~32V)/ DC 24V(12~48V)
    • -20~70°C operating temperature for hazardous environment applications (-40~70°C wide operating temperature available by request)
Technology
Standard
EIA/TIA-232 RS-232 (ITU-T v.28)EIA/TIA-422 RS-422 (ITU-T v.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Serial Interface
RS-232 2-wires,RS-422 4-wire, RS-485 2/4-wire
Architecture
PTP mode: Peer To Peer wiring with full or half duplex modeSFR mode: Serial Fiber Ring with half duplex mode
Interface
Number of Ports
1 x RS-232/RS-422/RS-485 serial port
1 x Fiber Transmit port, 1 x Fiber receive port
Connectors
Serial port: 7-pin removable terminal blockFiber port: 1 x Duplex ST

Power input: 3-pin removable terminal block with earth ground

Transmit Baud Rate
300bps to 921.6Kbps
Link distance
RS-232: 50 feet
RS-422: 4000 feet
RS-485: 4000 feet
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 5KM
Single-mode fiber: 8/125um, 9/125um max. distance 40KM
Serial signal
RS-232: TxD, RxD, Signal Ground.
RS-422: TxD+, TxD-, RxD+, RxD-, Signal Ground
RS-485 4 wires: TxD+, TxD-, RxD+, RxD-, Signal Ground.
RS-485 2 wires: Data+, Data-, Signal Ground.
Fiber Transceiver
JetCon2401-m, Multi-mode:
Distance:5KM @ 62.5/125um multi mode cable with 3dbm/km attenuation
Wave-length: 820nm
TX Power: -12dBm (Min) ~ -9dBm (Max)
RX Sensitivity: -28dBm (Min)
Link budget: 16dBmJetCon2401-s, Single-mode:
Distance: 40KM@9/125um single mode cable with 0.35dbm/km attenuation
Wave-length:1310nm
TX Power: -9dBm (Min) ~-8dBm (Max)
RX Sensitivity: -27dBm (Min)
Link budget: 18dBm
Configuration DIP Switch
Switch 1 and 2: serial interface mode selection
Switch 3: RX 120ohm terminator Disable (off)/Enable (on)
Switch 4: TX 120ohm terminator Disable (off)/Enable (on)
Switch 5: PTP mode (off) / SFR mode (on).
Diagnostic LED
Power LED: Power 1 (Green)
TX (Green): Serial port is on transmitting data.
RX (Yellow): Serial port is on receiving data.
Ring mode (Green): Working on SFR (Serial Fiber Ring) mode.
Power Requirements
System Power
Positive or negative power system.
DC 24V (12~48V) with reverse polarity protection.
AC 24V (AC12~32V, 50/60Hz)
Provides 0.65A over current protection
Power Consumption
1.5Watts @ 24V(Maximum)
Mechanical
Installation
DIN-Rail mount or desktop
Casing
IP-30 grade aluminum metal case
Dimensions
24.7mm(H) x 74mm (W) x 99mm (D) with DIN
Weight
0.24kg with package
0.135kg without package
Environmental
Operating Temperature
-20 ~ 70°C(JetCon 2401-mw/2401-sw -40~70°C)
Operating Humidity
5% ~ 95% (Non-condensing)
Storage Temperature
-40 ~ 80°C
Storage Humidity
5% ~ 95% (Non-condensing)
Regulatory Approvals
EMI
FCC Class B; CE/EN55022:2003,class B; CE/EN61000-3-2:2001 Harmonic Test CE/EN61000-3-3:1995 Flicker test
EMS
EN61000-4-2:1998, ESD Testing, Level 3EN61000-4-3:1998, RS testing, Level 3

EN61000-4-4:1995, EFT testing, Level 3

EN61000-4-5:1995, Surge test, Level 3

EN61000-4-6:1996, CS testing, Level 3

Safety
CE/EN60950
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
TOP
Chat us
1
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!