| • Techonology |
| Standard |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control and Back Pressure
|
| • Performance |
| Switch Technology |
3.2 Gbit/s Store and Forwarding Technology |
|
System forwarding performance
|
1.19 Mega packets per second, 64 bytes packet size. (Switch Mode)
14880 pps for 10Base-T
148810 pps for 100Base-TX/ FX
|
| Mac address |
1K MAC address entries with automatic learning and aging (Switch Mode only) |
| Packet buffer |
512 kbits shared memory |
| Forwarding Technology |
Store and forward |
| Link Lose Forward |
Supports Bi-directional Link Loss Forwarding function (Converter mode only) |
| Operating Mode |
Converter/Switch mode selected by DIP switch
Switch Mode: data exchange on 4 ports (Channel A, B exchange)
Converter mode: data forwarding on independent channel (A, B) |
| Digital Output |
Dry Relay Output with 1 A @ 24 V DC ability |
| • Interface |
| Ethernet copper port |
2 × 10/100 TX ports with Auto MDI/MDI-X, Auto Negotiation |
| Fibre port |
2 × 100 Mbit/s Fibre port, SC or ST (optioned).
Westermo MCI-422f-mm: Multi-mode (Channel A,B)
Westermo MCI-422f-ss : Single-mode (Channel A,B)
Westermo MCI-422f-ms : Multi-mode (Channel A),
Single-mode (Channel B |
| Ethernet copper cable |
RJ-45 Ethernet port : 100 meters
10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable
100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable
|
| Ethernet Fibre Cable |
Westermo MCI-422-m: 2 km distance, 50 ~ 62.5/125 μm
Multi-mode Fibre Cabel.
Westermo MCI-422-s: 30 km distance, 8 ~ 10/125 μm
Single-mode Fibre cable |
| Diagnostic LEDs |
System Power (Green on) : Power 1, 2
Relay Alarm: Active (Red)
Link Loss Forwarding: Enable (Green on)
Op. Mode: Convert (Green on)
Fibre Ethernet Port (Channel A/B): Link/Activity (Green on/Yellow Blinking)
Ethernet Port: Link/Activity (Green on/Yellow Blinking) |
| DIP switch |
DIP Switch 1:
CH. B Fibre link event alarm control, Enable (On) / Disable (Off)
DIP Switch 2:
CH. A Fibre link event alarm control, Enable (On)/ Disable (Off)
DIP Switch 3:
CH. B Copper link event alarm control, Enable (On)/ Disable (Off)
DIP Switch 4:
CH. A Copper link event alarm control, Enable (On)/ Disable (Off)
DIP Switch 5:
Operating mode select, Converter mode (On)/ Switch mode (Off)
DIP Switch 6:
Link Loss Forwarding control, Enable(On)/ Disable (Off)
DIP Switch 7:
Power Event Alarm Control, Enable (On) / Disable (Off)
|
| Reset button |
For Operating mode change & LLF function activation |
| Power connector |
Removable Terminal Block |
| Digital input |
Removable Terminal Block |
| • Power requirement |
| System power |
DC 10~60V with polarity reverses correction.
Supports Positive / Negative power system
|
| Consumption |
6 Watts / DC 24 |
| • Mechanical |
| System Installation |
DIN-Rail Installation |
| Enclosure protection |
Ingress Protection code – 31 |
| Dimensions |
99 (D) x 55 (W) x 120 (H), unit: mm (without Din-rail kit) |
| Weight |
- |
| • Environmental |
| Operating voltage |
–25 ~ 75°C / –40 ~ 75°C (wide operating temperature model) |
| Operating humidity |
0% ~ 95%, (non-condensing) |
| Storage temperature |
–40 ~ 75ºC |
| Storage humidity |
0% ~ 95%, (non-condensing) |
| • Regulatory approvals |
| EMI |
CE/EN 55022 class A, FCC Class A, Compliance with EN 50155 EMI
EN 61000-3-2:2006, EN 61000-3-3, EN 61000-6-2
|
| EMS |
CE/ EN 55024, EN 61000-6-4, Compliance with EN 50155 EMS, IEC 61000-4-2,
IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8
|
| Safety |
Hi-pot Testing – AC 1.5 KV |
| Shock |
IEC60068-2-27 |
| Vibration |
IEC60068-2-6 |
| Free fall |
IEC60068-2-32 |
