Industrial Ethernet Media Converter
MCI-211G

The MCI-211G is a simple and cost effective Gigabit Ethernet media industrial converter suitable for use in a wide range of factory and building automation applications. The MCI-211G features Link Fault Forwarding (LFF) in order to forward link status changes to alert remote or central management systems via the connected media.

The MCI-211G is a simple and cost effective Gigabit Ethernet media industrial converter suitable for use in a wide range of factory and building automation applications. The MCI-211G features Link Fault Forwarding (LFF) in order to forward link status changes to alert remote or central management systems via the connected media.

The unit is designed for DIN rail mounting into industrial cabinets allowing simple Ethernet connections to be established between PLCs, I/O units, drives, inverters and HMIs. The dual power input makes the unit ideal in these types of application and the fault relay can be connected to an I/O unit to provide simple network management.

Designed to work in industrial environments with its IP 31 Aluminium housing and a wide temperature specification the
MCI-211 is an ideal automation solution,

The Industrial Ethernet Media Converter MCI-211 is so easy to use, simply connect power to the screw terminals and plug in your RJ-45 cables. If you plan to use the fault contacts a DIP switch allows configuration whilst LEDs provide simple diagnostics if required.

  • onverts 10/100/1000TX to Gigabit Fibre
  • Flexible SFP Fibre transceiver design
  • Auto Fault Detection and Alarm
  • Fault Alert for port and power
  • Two way Link loss forwarding
  • Power redundancy with wide range input
  • IP-31 grade protection with wide range operating temperature
  • 1.5 KV Hi-Pot testing passed
• Techonology
Standard
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T,
IEEE802.3z Gigabit Ethernet Fibre, IEEE802.3x flow control and back-pressure.
IEEE802.1p Class of Service, IEEE802.1Q Quality of Service
• Performance
Forwarding Technology Store and Forward technology with 64 ~1536 bytes packet forwarding ability
System Throughput 1.49 Mpps
Packet buffer 2.75 Mbits
Link Fault Forwarding Two-way loss-signature auto forwarding, configured by DIP switch
Event alarm Configurable relay alarm output for port or power events
• Interface
Number of Ports
1 x 10/100/1000 Base-TX with Auto MDI/MDI-X function, Auto-Negotiation
1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver
Connectors
10/100/1000 Base-TX: RJ-45
SFP socket: support 3.3 V Gigabit Ethernet 1.25 Gbit/s Fibre Transceiver.

Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output

Cables
RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100 meters
Configuration DIP Switch
DIP 1: Port Event Alarm Enable/Disable
DIP 2: Power Event Alarm Enable/Disable
DIP 3: Link Fault Forwarding Enable/Disable
Diagnostic LED
System:
Power (Green) x2, Link Fault Forwarding (Red) x1, Alarm (Red) x1
RJ-45 port:
Speed (Green):
On (1000 Mbit/s Link), Blinking (100 Mbit/s Link),
Off (10 Mbit/s Link or disconnect).
Link/Activity (Green):
On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow):
On (link at full duplex mode), Blinking (Collision)
SFP port:
Link/Activity (Green): On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking (Collision)
• Power requirement
System power DC 24V (12~48V) with polarity reverse correction and over current protection
Consumption 8 Watts @ DC 24 V (Maximum)
• Mechanical
Installation DIN-Rail mount
Case Aluminum alloy metal case with grade 31 of ingress protection
Dimension 120 mm (H) x 55 mm (W) x108 mm (D) (with DIN rail clip)
Weight 0.904 kg with package (0.655 kg without package)
• Environmental
Operating voltage –25 ~ 70ºC
Operating humidity 0% ~ 95%, (non-condensing)
Storage temperature –40 ~ 85ºC
Storage humidity 0% ~ 95%, (non-condensing)
• Regulatory approvals
Hi-Pot AC 1.5 KV on port to port and port to power
EMI FCC Class A, CE/EN55022
EMC immunity interface
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-8, EN61000-4-11
Safety CE/EN60950
Shock IEC60068-2-27
Vibration IEC60068-2-6
Free fall IEC60068-2-32
TOP
Chat us
1
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!