INFORMATION & TECHNOLOGY

Industrial Ethernet Extender
DDW-120

The Westermo Industrial Ethernet Extender Wolverine DDW-120 series of Ethernet extenders allow cost effective Ethernet networks to be created over long distances, at data rates of up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables. This can lead to considerable financial savings as expensive fibre cables do not need to be installed. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. Configuration of the Westermo Industrial Ethernet Extender Wolverine DDW-120 is performed using only DIP switches, which ensures rapid installation.

Category: Point to Point

The DDW-120 is Westermo Industrial Ethernet Extender designed for use in heavy duty industrial applications. The wide power range, comprehensive diagnostics and TBU transient protection make it ideal for installation and monitoring in industrial applications.

Only industrial grade components are used which gives the Westermo Industrial Ethernet Extender Wolverine DDW-120 an MTBF of 600,000 hours and ensures a long service life. A wide operating temperature range of –40 to +70°C (–40 to +158°F) can be achieved with no moving parts. The Industrial Ethernet Extender Wolverine DDW-120 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial environments and rail trackside applications.

The Westermo Industrial Ethernet Extender Wolverine DDW-120 is transparent for multicast addressing and VLAN packets, allows VPN pass-through for IPsec and can be used with protocols like MODBUS/TCP and Profinet IO. Line diagnostics can be collected using a simple plug-in diagnostic cable allowing the user to determine the quality of the line in use. The link fault forward function helps to transfer indication of media failure onto connected ports to ensure that the Westermo Industrial Ethernet Extender Wolverine DDW-120 can be used in resilient network structures.

• Product Description
Status	Active
Article number	3621-0110
Ports	1 x 2 positon detachable scerw terminal, 192 kbit/s to 15304 kbit/s 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
Description	Ethernet SHDSL Extender
• Approvals
Traffic	NEMA TS 2-2003 version 02.06 Traffic Controller Assemblies with NTCIP Requirements
• Reliability prediction
MTBF, operating	600 000 h, MIL-HDBK- 217F
Service life, operating	10 years
• EMC (Electromagnetic Compatibility)
EN 61000-6-2	Immunity industrial environments
EN 55024	Immunity IT equipment
EN 61000-6-4	Emission industrial environments
FCC Part 15	Class B
EN 50121-4	Railway signalling and telecommunications apparatus
• EMC Specification
EN 61000-4-2, ESD	Contact: ± 6 kV Air: ± 8 kV
IEC 61000-4-3, RF field AM modulated	10 V/m 80% AM (1 kHz), 80 – 1 000 MHz 20 V/m 80% AM (1 kHz), 80 – 2 000 MHz
ENV 50204, RF field 900 MHz	20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients	Signal ports: ± 2 kV Power ports: ± 2 kV
EN 61000-4-5, surge	Signal ports unbalanced: ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced: ± 2 kV line to earth, ± 1 kV line to line Power ports: ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity	Signal ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic field	100 A/m, 50 Hz, 16.7 Hz & 0 Hz
EN 61000-4-9, pulsed magnetic field	300 A/m, 6.4 / 16 µs pulse
EN 61000-4-11, Voltage dips and interruption	AC power ports 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Voltage dips and interuption	AC power ports, 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Mains freq. 50 Hz	Signal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 Hz	Signal ports, 250 V 50 Hz line to earth
EN 55022, radiated RF emission	Class B
FCC part 15, radiated RF emission	Class B
EN 55022, conducted emission	AC/DC power ports, Class B
FCC part 15, conducted emission	AC power ports, Class B
EN 55022, conducted emission	AC/DC power ports, Class B
• Safety
Safety	UL/IEC/CSA/EN
EN 60950-1,dielectric strength	Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min 2 kVrms 50 Hz 1 min (@ rated power <60 V)
• Climatic
Temperature, operating	–40 to +70ºC (–40 to +158ºF)
Temperature, storage	–40 to +70ºC (–40 to +158ºF)
Humidity, operating	5 to 95% relative humidity
Humidity, storage	5 to 95% relative humidity
• Enclosure
Enclosure	DDW-120, UL 94, PC / ABS, Flammability class V-1
Dimensions (W x H x D)	35 x 121 x 119 mm
Weight	0.2 kg
Degree of protection	IEC 529, IP 21
Cooling	Convection
Mounting	Horizontal on 35 mm DIN-rail
• Mechanical
IEC 60068-2-6, vibration	7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shock	15 g, 11 ms
• Interface specifications, power
Operating voltage	10 to 60 VDC
Rated voltage	12 to 48 VDC
Rated current	240 mA @ 12 VDC 110 mA @ 24 VDC 60 mA @ 48 VDC
Rated frequency	DC
Inrush current	0.23 A2s
Startup current	0.65 Apeak
Polarity	Reverse polarity protected
Redundant power input	Yes
Isolation to	All other
Connection	2.5 mm jack, use Westermo cable 1211-2027
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
• Interface specifications, service
Electrical specification	TTL level
Data rate	115.2 kbit/s
Data format	8 data bits, none parity, 1 stop bits, no flow control
Circuit type	SELV
Transmission range	15 m
Isolation to	All other
Galvanic connection to	None
Connection	2.5 mm jack, use Westermo cable 1211-2027
• Interface specifications, DSL
Electrical specification	IEEE G.991.2 Annex B
Data rate	192 kbit/s to 15304 kbit/s
Protocol	EFM according to IEEE 802.3-2004
Transmission range	According to ITU-T G.991.2 depending on the line quality
Protection	Overcurrent / overvoltage protection circuit and varistor
Isolation to	All other
Connection	Detachable screw terminal
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
Electrical specification	IEEE std 802.3. 2000 Edition
Data rate	10 Mbit/s, 100 Mbit/s, manual or auto
Duplex	Full or half, manual or auto
Circuit type	SELV
Transmission range	100 m
Isolation to	All other
Connection	RJ-45 MDI or auto MDI/MDI-X
Shielded cable	Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing	Isolated to all other circuits
Miscellaneous	If Auto-Neg. is disabled then this interface will be set MDI
Number of ports	1

• Product Description
Status	Active
Article number	3621-5110
Ports	1 x 2 positon detachable scerw terminal, 192 kbit/s to 15304 kbit/s 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
Description	Ethernet SHDSL Extender
• Approvals
Hazardous locations	FM Approvals, Class I, Division 2
• Reliability prediction
MTBF, operating	600 000 h, MIL-HDBK- 217F
Service life, operating	10 years
• EMC (Electromagnetic Compatibility)
EN 61000-6-2	Immunity industrial environments
EN 55024	Immunity IT equipment
EN 61000-6-4	Emission industrial environments
FCC Part 15	Class B
EN 50121-4	Railway signalling and telecommunications apparatus
• EMC Specification
EN 61000-4-2, ESD	Contact: ± 6 kV Air: ± 8 kV
IEC 61000-4-3, RF field AM modulated	10 V/m 80% AM (1 kHz), 80 – 1 000 MHz 20 V/m 80% AM (1 kHz), 80 – 2 000 MHz
ENV 50204, RF field 900 MHz	20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients	Signal ports: ± 2 kV Power ports: ± 2 kV
EN 61000-4-5, surge	Signal ports unbalanced: ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced: ± 2 kV line to earth, ± 1 kV line to line Power ports: ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity	Signal ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic field	100 A/m, 50 Hz, 16.7 Hz & 0 Hz
EN 61000-4-9, pulsed magnetic field	300 A/m, 6.4 / 16 µs pulse
EN 61000-4-11, Voltage dips and interruption	AC power ports 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Voltage dips and interuption	AC power ports, 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Mains freq. 50 Hz	Signal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 Hz	Signal ports, 250 V 50 Hz line to earth
EN 55022, radiated RF emission	Class B
FCC part 15, radiated RF emission	Class B
EN 55022, conducted emission	AC/DC power ports, Class B
FCC part 15, conducted emission	AC power ports, Class B
EN 55022, conducted emission	AC/DC power ports, Class B
• Safety
Safety	W-mo, EN 60079-0 and EN 60079-15
EN 60950-1,dielectric strength	Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min 2 kVrms 50 Hz 1 min (@ rated power <60 V)
• Climatic
Temperature, operating	–40 to +70ºC (–40 to +158ºF)
Maximum surface temperature	135°C (temperature class T4)
Temperature, storage	–40 to +70ºC (–40 to +158ºF)
Humidity, operating	5 to 95% relative humidity
Humidity, storage	5 to 95% relative humidity
• Enclosure
Enclosure	Cabelec 6141
Dimensions (W x H x D)	34 x 123 x 121 mm (1.33 x 4.84 x 4.76)
Weight	0.2 kg
Degree of protection	IEC 529, IP 21
Cooling	Convection
Mounting	Horizontal on 35 mm DIN-rail
• Mechanical
IEC 60068-2-6, vibration	7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shock	15 g, 11 ms
• Interface specifications, power
Operating voltage	10 to 60 VDC
Rated voltage	12 to 48 VDC
Rated current	240 mA @ 12 VDC 110 mA @ 24 VDC 60 mA @ 48 VDC
Rated frequency	DC
Inrush current	0.23 A2s
Startup current	0.65 Apeak
Polarity	Reverse polarity protected
Redundant power input	Yes
Isolation to	All other
Connection	2.5 mm jack, use Westermo cable 1211-2027
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
• Interface specifications, service
Electrical specification	TTL level
Data rate	115.2 kbit/s
Data format	8 data bits, none parity, 1 stop bits, no flow control
Circuit type	SELV
Transmission range	15 m
Isolation to	All other
Galvanic connection to	None
Connection	2.5 mm jack, use Westermo cable 1211-2027
• Interface specifications, DSL
Electrical specification	IEEE G.991.2 Annex B
Data rate	192 kbit/s to 15304 kbit/s
Protocol	EFM according to IEEE 802.3-2004
Transmission range	According to ITU-T G.991.2 depending on the line quality
Protection	Overcurrent / overvoltage protection circuit and varistor
Isolation to	All other
Connection	Detachable screw terminal
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
Electrical specification	IEEE std 802.3. 2000 Edition
Data rate	10 Mbit/s, 100 Mbit/s, manual or auto
Duplex	Full or half, manual or auto
Circuit type	SELV
Transmission range	100 m
Isolation to	All other
Connection	RJ-45 MDI or auto MDI/MDI-X
Shielded cable	Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing	Isolated to all other circuits
Miscellaneous	If Auto-Neg. is disabled then this interface will be set MDI
Number of ports	1

Industrial Ethernet Switch

Unmanaged Industrial Ethernet Switch

Managed Industrial Ethernet Switch

Industrial Ethernet Extender

• Product Description
Status	Active
Article number	3621-0110
Ports	1 x 2 positon detachable scerw terminal, 192 kbit/s to 15304 kbit/s 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
Description	Ethernet SHDSL Extender
• Approvals
Traffic	NEMA TS 2-2003 version 02.06 Traffic Controller Assemblies with NTCIP Requirements
• Reliability prediction
MTBF, operating	600 000 h, MIL-HDBK- 217F
Service life, operating	10 years
• EMC (Electromagnetic Compatibility)
EN 61000-6-2	Immunity industrial environments
EN 55024	Immunity IT equipment
EN 61000-6-4	Emission industrial environments
FCC Part 15	Class B
EN 50121-4	Railway signalling and telecommunications apparatus
• EMC Specification
EN 61000-4-2, ESD	Contact: ± 6 kV Air: ± 8 kV
IEC 61000-4-3, RF field AM modulated	10 V/m 80% AM (1 kHz), 80 – 1 000 MHz 20 V/m 80% AM (1 kHz), 80 – 2 000 MHz
ENV 50204, RF field 900 MHz	20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients	Signal ports: ± 2 kV Power ports: ± 2 kV
EN 61000-4-5, surge	Signal ports unbalanced: ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced: ± 2 kV line to earth, ± 1 kV line to line Power ports: ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity	Signal ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic field	100 A/m, 50 Hz, 16.7 Hz & 0 Hz
EN 61000-4-9, pulsed magnetic field	300 A/m, 6.4 / 16 µs pulse
EN 61000-4-11, Voltage dips and interruption	AC power ports 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Voltage dips and interuption	AC power ports, 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Mains freq. 50 Hz	Signal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 Hz	Signal ports, 250 V 50 Hz line to earth
EN 55022, radiated RF emission	Class B
FCC part 15, radiated RF emission	Class B
EN 55022, conducted emission	AC/DC power ports, Class B
FCC part 15, conducted emission	AC power ports, Class B
EN 55022, conducted emission	AC/DC power ports, Class B
• Safety
Safety	UL/IEC/CSA/EN
EN 60950-1,dielectric strength	Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min 2 kVrms 50 Hz 1 min (@ rated power <60 V)
• Climatic
Temperature, operating	–40 to +70ºC (–40 to +158ºF)
Temperature, storage	–40 to +70ºC (–40 to +158ºF)
Humidity, operating	5 to 95% relative humidity
Humidity, storage	5 to 95% relative humidity
• Enclosure
Enclosure	DDW-120, UL 94, PC / ABS, Flammability class V-1
Dimensions (W x H x D)	35 x 121 x 119 mm
Weight	0.2 kg
Degree of protection	IEC 529, IP 21
Cooling	Convection
Mounting	Horizontal on 35 mm DIN-rail
• Mechanical
IEC 60068-2-6, vibration	7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shock	15 g, 11 ms
• Interface specifications, power
Operating voltage	10 to 60 VDC
Rated voltage	12 to 48 VDC
Rated current	240 mA @ 12 VDC 110 mA @ 24 VDC 60 mA @ 48 VDC
Rated frequency	DC
Inrush current	0.23 A2s
Startup current	0.65 Apeak
Polarity	Reverse polarity protected
Redundant power input	Yes
Isolation to	All other
Connection	2.5 mm jack, use Westermo cable 1211-2027
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
• Interface specifications, service
Electrical specification	TTL level
Data rate	115.2 kbit/s
Data format	8 data bits, none parity, 1 stop bits, no flow control
Circuit type	SELV
Transmission range	15 m
Isolation to	All other
Galvanic connection to	None
Connection	2.5 mm jack, use Westermo cable 1211-2027
• Interface specifications, DSL
Electrical specification	IEEE G.991.2 Annex B
Data rate	192 kbit/s to 15304 kbit/s
Protocol	EFM according to IEEE 802.3-2004
Transmission range	According to ITU-T G.991.2 depending on the line quality
Protection	Overcurrent / overvoltage protection circuit and varistor
Isolation to	All other
Connection	Detachable screw terminal
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
Electrical specification	IEEE std 802.3. 2000 Edition
Data rate	10 Mbit/s, 100 Mbit/s, manual or auto
Duplex	Full or half, manual or auto
Circuit type	SELV
Transmission range	100 m
Isolation to	All other
Connection	RJ-45 MDI or auto MDI/MDI-X
Shielded cable	Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing	Isolated to all other circuits
Miscellaneous	If Auto-Neg. is disabled then this interface will be set MDI
Number of ports	1

• Product Description
Status	Active
Article number	3621-5110
Ports	1 x 2 positon detachable scerw terminal, 192 kbit/s to 15304 kbit/s 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
Description	Ethernet SHDSL Extender
• Approvals
Hazardous locations	FM Approvals, Class I, Division 2
• Reliability prediction
MTBF, operating	600 000 h, MIL-HDBK- 217F
Service life, operating	10 years
• EMC (Electromagnetic Compatibility)
EN 61000-6-2	Immunity industrial environments
EN 55024	Immunity IT equipment
EN 61000-6-4	Emission industrial environments
FCC Part 15	Class B
EN 50121-4	Railway signalling and telecommunications apparatus
• EMC Specification
EN 61000-4-2, ESD	Contact: ± 6 kV Air: ± 8 kV
IEC 61000-4-3, RF field AM modulated	10 V/m 80% AM (1 kHz), 80 – 1 000 MHz 20 V/m 80% AM (1 kHz), 80 – 2 000 MHz
ENV 50204, RF field 900 MHz	20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients	Signal ports: ± 2 kV Power ports: ± 2 kV
EN 61000-4-5, surge	Signal ports unbalanced: ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced: ± 2 kV line to earth, ± 1 kV line to line Power ports: ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity	Signal ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic field	100 A/m, 50 Hz, 16.7 Hz & 0 Hz
EN 61000-4-9, pulsed magnetic field	300 A/m, 6.4 / 16 µs pulse
EN 61000-4-11, Voltage dips and interruption	AC power ports 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Voltage dips and interuption	AC power ports, 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Mains freq. 50 Hz	Signal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 Hz	Signal ports, 250 V 50 Hz line to earth
EN 55022, radiated RF emission	Class B
FCC part 15, radiated RF emission	Class B
EN 55022, conducted emission	AC/DC power ports, Class B
FCC part 15, conducted emission	AC power ports, Class B
EN 55022, conducted emission	AC/DC power ports, Class B
• Safety
Safety	W-mo, EN 60079-0 and EN 60079-15
EN 60950-1,dielectric strength	Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min 2 kVrms 50 Hz 1 min (@ rated power <60 V)
• Climatic
Temperature, operating	–40 to +70ºC (–40 to +158ºF)
Maximum surface temperature	135°C (temperature class T4)
Temperature, storage	–40 to +70ºC (–40 to +158ºF)
Humidity, operating	5 to 95% relative humidity
Humidity, storage	5 to 95% relative humidity
• Enclosure
Enclosure	Cabelec 6141
Dimensions (W x H x D)	34 x 123 x 121 mm (1.33 x 4.84 x 4.76)
Weight	0.2 kg
Degree of protection	IEC 529, IP 21
Cooling	Convection
Mounting	Horizontal on 35 mm DIN-rail
• Mechanical
IEC 60068-2-6, vibration	7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shock	15 g, 11 ms
• Interface specifications, power
Operating voltage	10 to 60 VDC
Rated voltage	12 to 48 VDC
Rated current	240 mA @ 12 VDC 110 mA @ 24 VDC 60 mA @ 48 VDC
Rated frequency	DC
Inrush current	0.23 A2s
Startup current	0.65 Apeak
Polarity	Reverse polarity protected
Redundant power input	Yes
Isolation to	All other
Connection	2.5 mm jack, use Westermo cable 1211-2027
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
• Interface specifications, service
Electrical specification	TTL level
Data rate	115.2 kbit/s
Data format	8 data bits, none parity, 1 stop bits, no flow control
Circuit type	SELV
Transmission range	15 m
Isolation to	All other
Galvanic connection to	None
Connection	2.5 mm jack, use Westermo cable 1211-2027
• Interface specifications, DSL
Electrical specification	IEEE G.991.2 Annex B
Data rate	192 kbit/s to 15304 kbit/s
Protocol	EFM according to IEEE 802.3-2004
Transmission range	According to ITU-T G.991.2 depending on the line quality
Protection	Overcurrent / overvoltage protection circuit and varistor
Isolation to	All other
Connection	Detachable screw terminal
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
Electrical specification	IEEE std 802.3. 2000 Edition
Data rate	10 Mbit/s, 100 Mbit/s, manual or auto
Duplex	Full or half, manual or auto
Circuit type	SELV
Transmission range	100 m
Isolation to	All other
Connection	RJ-45 MDI or auto MDI/MDI-X
Shielded cable	Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing	Isolated to all other circuits
Miscellaneous	If Auto-Neg. is disabled then this interface will be set MDI
Number of ports	1

• Product Description
Status	Active
Article number	3621-5110
Ports	1 x 2 positon detachable scerw terminal, 192 kbit/s to 15304 kbit/s 1 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
Description	Ethernet SHDSL Extender
• Approvals
Hazardous locations	FM Approvals, Class I, Division 2
• Reliability prediction
MTBF, operating	600 000 h, MIL-HDBK- 217F
Service life, operating	10 years
• EMC (Electromagnetic Compatibility)
EN 61000-6-2	Immunity industrial environments
EN 55024	Immunity IT equipment
EN 61000-6-4	Emission industrial environments
FCC Part 15	Class B
EN 50121-4	Railway signalling and telecommunications apparatus
• EMC Specification
EN 61000-4-2, ESD	Contact: ± 6 kV Air: ± 8 kV
IEC 61000-4-3, RF field AM modulated	10 V/m 80% AM (1 kHz), 80 – 1 000 MHz 20 V/m 80% AM (1 kHz), 80 – 2 000 MHz
ENV 50204, RF field 900 MHz	20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients	Signal ports: ± 2 kV Power ports: ± 2 kV
EN 61000-4-5, surge	Signal ports unbalanced: ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced: ± 2 kV line to earth, ± 1 kV line to line Power ports: ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity	Signal ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports: 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-8, power frequency magnetic field	100 A/m, 50 Hz, 16.7 Hz & 0 Hz
EN 61000-4-9, pulsed magnetic field	300 A/m, 6.4 / 16 µs pulse
EN 61000-4-11, Voltage dips and interruption	AC power ports 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Voltage dips and interuption	AC power ports, 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction
EN 61000-4-16, Mains freq. 50 Hz	Signal ports, 100 V 50 Hz line to earth
SS 436 15 03, Mains freq. 50 Hz	Signal ports, 250 V 50 Hz line to earth
EN 55022, radiated RF emission	Class B
FCC part 15, radiated RF emission	Class B
EN 55022, conducted emission	AC/DC power ports, Class B
FCC part 15, conducted emission	AC power ports, Class B
EN 55022, conducted emission	AC/DC power ports, Class B
• Safety
Safety	W-mo, EN 60079-0 and EN 60079-15
EN 60950-1,dielectric strength	Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min 2 kVrms 50 Hz 1 min (@ rated power <60 V)
• Climatic
Temperature, operating	–40 to +70ºC (–40 to +158ºF)
Maximum surface temperature	135°C (temperature class T4)
Temperature, storage	–40 to +70ºC (–40 to +158ºF)
Humidity, operating	5 to 95% relative humidity
Humidity, storage	5 to 95% relative humidity
• Enclosure
Enclosure	Cabelec 6141
Dimensions (W x H x D)	34 x 123 x 121 mm (1.33 x 4.84 x 4.76)
Weight	0.2 kg
Degree of protection	IEC 529, IP 21
Cooling	Convection
Mounting	Horizontal on 35 mm DIN-rail
• Mechanical
IEC 60068-2-6, vibration	7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz
IEC-60068-2-27, shock	15 g, 11 ms
• Interface specifications, power
Operating voltage	10 to 60 VDC
Rated voltage	12 to 48 VDC
Rated current	240 mA @ 12 VDC 110 mA @ 24 VDC 60 mA @ 48 VDC
Rated frequency	DC
Inrush current	0.23 A2s
Startup current	0.65 Apeak
Polarity	Reverse polarity protected
Redundant power input	Yes
Isolation to	All other
Connection	2.5 mm jack, use Westermo cable 1211-2027
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
• Interface specifications, service
Electrical specification	TTL level
Data rate	115.2 kbit/s
Data format	8 data bits, none parity, 1 stop bits, no flow control
Circuit type	SELV
Transmission range	15 m
Isolation to	All other
Galvanic connection to	None
Connection	2.5 mm jack, use Westermo cable 1211-2027
• Interface specifications, DSL
Electrical specification	IEEE G.991.2 Annex B
Data rate	192 kbit/s to 15304 kbit/s
Protocol	EFM according to IEEE 802.3-2004
Transmission range	According to ITU-T G.991.2 depending on the line quality
Protection	Overcurrent / overvoltage protection circuit and varistor
Isolation to	All other
Connection	Detachable screw terminal
Connector size	0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable	Not required
Electrical specification	IEEE std 802.3. 2000 Edition
Data rate	10 Mbit/s, 100 Mbit/s, manual or auto
Duplex	Full or half, manual or auto
Circuit type	SELV
Transmission range	100 m
Isolation to	All other
Connection	RJ-45 MDI or auto MDI/MDI-X
Shielded cable	Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing	Isolated to all other circuits
Miscellaneous	If Auto-Neg. is disabled then this interface will be set MDI
Number of ports	1

INFORMATION & TECHNOLOGY

Industrial Ethernet ExtenderDDW-120

Industrial Ethernet Extender
DDW-120