Cat5e Horizontal ezi-JACK90 – (P/N: 1305-03030)


PowerPRO™ : Performance You Can Rely On! Cat.5e horizontal type Keystone ezi-JACK90™, T568A/ B

PowerPRO™ : Performance You Can Rely On!

Cat.5e horizontal type Keystone ezi-JACK90™, T568A/ B
The DINTEK ezi-TOOL™ system is an all-in-one punch down and wire trim process, design to assure even connections, better performance and faster fit off times. The products in the ezi-TOOL™ system comprise 90degree and 180degree Cat5e and Cat6 modular keystone jacks, as well as the universal DINTEKezi-TOOL™ for termination. The jacks work with either the ezi-TOOL™ or a standard 110 style DINTEK punch down tool, this avoiding the need to have two different style of jacks.


•  Voice
•  10Base T(IEEE 802.3)
•  Fast Ethernet(IEEE802.3)
•  100Vg-AnyLAN(IEEE 802.12)
•  Token Ring(IEEE 802.5)
•  TP-PMD(ANSI X3T9.5)
•  100Base-T Ethernet(IEEE 802.3u)
•  155/622 Mbps ATM
•  1000Base-T
•  550 MHz Broadband video


•  UL, ETL Verifi ed
• ANSI/TIA-568-C.2
•  ISO/IEC 11801
•  EN 50173


•  Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
•  110 type IDC termination
•  Accept 22~26AWG, stranded or solid wire
•  Modular jack meet FCC part 68
•  Wiring: T568A/B

Environmental Conditions

• Temperature range:
        Storage: -40 to +70°C
        Operational: -10 to +60°C
• Relative humidity (operational): max. non-condensing 93%

Electrical Characteristics

•  Insulation resistance between any two conductors: 500 MegaOhms min.
•  Dielectric with standing voltage: 1000V, RMS, 60HZ, 1 MIN.
•  Contact resistance: 20 MilliOhms max.
•  Current rating: 1.5 AMPS at 20°C
•  DC résistance: Max. 0.1 Ohms

Physical Characteristics

•  Housing: High-impact, Flame Retardant, UL94V-0 rated, spring wire/contact blades.
•  Contact material: Phosphor bronze alloy
•  Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.

Mechanical Characteristics

•  Total mating force: 800 grams for a 8 wire leads minimum.
•  Retention: 30lbs min between the jack and plug.
•  Insertion/Extraction life: 750 cycles minimum.
•  Number of IDC terminations: 200 minimum
Chat us
Need Help?
Contact us
Welcome to Gigantika

If you have any questions regarding our products and solutions, please feel free to engage in a chat with us!