Cat.5e UTP Patch Cord – PVC – (P/N: 1201-03XXX)

Overview

PowerPRO™ : Performance You Can Rely On! DINTEK PowerPRO Enhanced Category 5 Patch Cords are specifically, designed to support high speed data networks for 100mb and Gigabit 802.3z Ethernet applications, and are fully tested to meet TIA/EIA Category 5E channel requirements.

Compare Product

PowerPRO™ : Performance You Can Rely On!

DINTEK PowerPRO Enhanced Category 5 Patch Cords are specifically designed to support high speed data networks for 100mb and Gigabit 802.3z Ethernet  applications, and are fully tested to meet TIA/EIA Category 5E channel requirements. The patch cables are made from high quality shielded four pair 24AWG stranded wire. DINTEK PowerPRO Enhanced Category 5 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerPRO UTP products be used in a end-to-end system to maximize cabling performance.

Applications

•   Voice
•   ISDN
•   10Base T(IEEE 802.3)
•   Fast Ethernet(IEEE802.3)
•   100Vg-AnyLAN(IEEE 802.12)
•   Token Ring(IEEE 802.5)
•   TP-PMD(ANSI X3T9.5)
•   100Base-T Ethernet(IEEE 802.3u)
•   155/622 Mbps ATM
•   1000Base-T
•   550 MHz Broadband video

Standards

•   UL, ETL Verifi ed
•   ANSI/TIA-568-C.2
•   ISO/IEC 11801
•   EN 50173

Features

•   24AWG stranded wire provides maximum flexibility.
•   Brilliant colors make management a snap
•   Fully tested to meet ANSI/TIA-568-C.2 category 5e requirement.
•   The various colors are available to meet TIA/EIA-606 standards.
•   The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM requirements.

Electrical Characteristics

•   Contact material: Phosphor bronze alloy
•   Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.

Cable Data

•   Twisted pair color code:
Pair 1> blue, white/blue ring.
Pair 2> orange, white/orange ring
Pair 3> green, white/green ring
Pair 4> brown, white/brown ring
•   Conductor: 24AWG (7x0.2±0.01mm) stranded anneal copper wire
•   Insulation material: HDPE,FRPE
•   Diameter of dielectric core: 0.99±0.02mm
•   Insulation thickness: min AVG 0.19mm
•   Number of twist pairs: 4 pairs
•   Assembly: 4 pairs of dielectric core shall be stranded in circular form.
•   Material of jacket: PVC/LSZH
•   Thickness of jacket: AVG 0.5mm
•   Nominal O.D.: 5.5±0.2mm
•   Flame rating: CM
•   Jacket color: red,orange,yellow,green,blue,grey, etc.
•   RJ45 Plug: Housing>polycarbonate
•   Contact>copper alloy 50u” gold plated over nickel
•   Strength: 20lbs. min
•   Durability: 200 cycles min.
•   Insulation resistance: 500 megaohms min.
•   Molded boots prevent pin from bending and cables from kink.
•   Wiring schemes: T568B

TOP